Brick is easy to damage with the wrong bit or too much force. A blunt masonry bit can skate across the face, overheat, and leave a chipped crater around the hole. For most household work,…
Plastic parts are easy to damage with the wrong bit. A standard twist bit can grab as it breaks through, leaving a ragged exit hole or splitting a thin panel. For clean, accurately placed holes,…
A small utility shelf can look light and still put real leverage on its fasteners. A 12-inch-deep shelf holding detergent or tools pulls outward on its upper fasteners, especially if someone bumps it or loads…
Best choice for a metal bracket on concrete block For most light-to-medium-duty brackets, a correctly sized masonry screw is the simplest choice. It goes directly into a drilled pilot hole, needs no separate sleeve, and…
Installing screws into wooden wall studs is one of the jobs impact drivers handle especially well. They are compact, deliver high rotational force, and resist cam-out better than a standard drill when driving long screws.…
Softwood trim is easy to drill, but it is also easy to split, crush, or leave with a ragged exit hole. The right bit depends on the hole size and whether the hole will be…
Thin brass sheet is easy to drill with the right setup—and easy to bend, scratch or catch with the wrong one. For most holes in sheet up to about 1 mm thick, a basic cordless…
Long screws put more stress on a driver bit than short cabinet screws do. The bit has to stay seated while the fastener cuts through wood, and the impact driver delivers repeated twists that can…
Installing concrete sleeve anchors is a straightforward job when the hole is straight, correctly sized and free of dust. The drill matters, but so do the carbide bit, the anchor’s instructions and the concrete itself.…
Best Drill Bit Sets for Drilling Metal with Reduced Burrs The drill bit set that leaves the cleanest hole is not always the most expensive one. Burrs depend on the bit’s cutting edge, the metal…